HOTLINE:+8613974960765      +8618507312158
Contact Us/ CONTACT US
Service Hotline +8613974960765
Vertical turbine pump factory in hunan province Perfect Industry Co., Ltd

Email:susie@hnljpump.com

Mobile:+8618507312158

TEL:+8613974960765

Your position:HOME »Knowledge »vertical turbine pump

vertical turbine pump

Positioning mechanism for vertical suspended semi submersible vertical turbine pump

发布时间:2024/10/22 23:14:13 人气: [content:visits]

  

Positioning mechanism for vertical suspended semi submersible vertical turbine pump


The positioning mechanism for a vertical suspended semi submersible vertical turbine pump includes a motor frame, adjusting nuts, keys, bolts, bearing bodies, bolts, bearing discs, radial bearings, shafts, bolts, bearing sleeves, angular contact ball bearings, and bolts. Its feature is that a positioning ring is installed on the shaft below the motor frame, and a rubber buffer pad is installed on the shaft between the positioning ring and the radial bearing at the bottom of the motor frame. Its characteristics are: the positioning ring is a circular ring structure with a thickness h of 18-25mm, an inner diameter equal to the outer diameter of the shaft, a gap with a width of 2mm on the plane, a countersunk hole and a through hole are machined above the gap, and a threaded hole is machined below the gap. The positioning ring is fixed to the shaft by screws passing through the countersunk hole and the through hole. The advantage of this technical method is that it can position the entire rotor and prevent it from being lifted upwards. The rubber buffer pad serves as a buffer to prevent the radial bearings from being damaged by impact. So the mechanism effectively prevents the rotor from lifting upwards and avoids damage to the bearings.

Positioning mechanism for vertical suspended semi submersible vertical turbine pump.jpg

Technical requirements: 1. Positioning mechanism for vertical suspended semi submersible vertical turbine pump, including motor frame, adjusting nut, key, bolt, bearing body, bolt, bearing disc, radial bearing, shaft, bolt, bearing sleeve, angular contact ball bearing, bolt, characterized in that: a positioning ring is installed on the shaft below the motor frame, and a rubber buffer pad is installed on the shaft between the positioning ring and the radial bearing at the bottom of the motor frame.


标签: Pump,vertical,Turbine,Suspended,submersible

相关推荐

Online Service
Service hotline

Service hotline

+8613974960765

WeChat
Manufacturer of vertical turbine pump
GO TOP
Manufacturer of vertical turbine pump

screenshots ,WeChat Scan the Qr Code

WeChat:ljpump6666